Large stand for bird feeder - gray

With its footprint of 40 x 40 cm, this stand is significantly larger than our smaller versions. We recommend this for our larger birdhouses and bird baths, especially or if they are exposed to stronger winds.

Except for the size, it has the same characteristics:
An enclosed galvanized threaded rod is screwed into a socket in the concrete base, then the birdhouse with the rod is attached.
Since the birdhouse is higher (it is not 15-20 cm in the ground), we can shorten the rod of the birdhouse to your desired size. Simply enter the desired height (total height or measured from the floor to the lower edge of the birdhouse) in the message field at the end of the ordering process.

The scope of delivery consists of a stand + threaded rod. If you order a birdhouse at the same time, we always cut the rods straight. The rod height is then approx. 1.45 m or corresponds to your desired size.
The threaded rod is already attached to the rod of the birdhouse so that you only have to screw it onto the stand.
We use this method for bird houses where the Satb is optionally available.

material: gray or anthracite lacquered concrete
40 x 40 x 4,5 cm
16 kg